Include support for the Mac OS X Aqua (Carbon/Cocoa) GUI: atm: Enable Asynchronous Transfer Mode protocol support: appindicator: Build in support for notifications using the libindicate or libappindicator plugin: audiofile: Add support for libaudiofile where applicable: audit: Enable support for Linux audit subsystem using sys-process/audit. Mac Basics—Tutorials on using a Mac, Mac OS X keyboard shortcuts, Apple How-To Guides for Mac OS X, Anatomy of a Mac, MacTips, Switching to Mac Superguide, and Switching to the Mac: The Missing Manual, Mavericks Edition. Additionally,.Texas Mac Man. recommends: Quick Assist, Welcome to the Switch To A Mac Guides, Take Control E-books, and A.
Hi everyone,
We have two ACS 5.1 appliances. By mistake we install the same license in both devices and when we tried to register the secondary ACS to the primary ACS it says the the license is already in used in the deployment. Furthermore, it is not possible to uninstall the license using the GUI and we can not find any command in CLI. How can we uninstall the license in the secondary box so we can install the correct license? We are trying to omit re-imaging the secondary box beacuse we don't have physical access to it now.
Best Regards!
Gjs_1 Mac Os Catalina
There is no mechanism to update a permanent base license once it is installed
SInce the license is stored in the database then doing something like a clean install followed by a restore will not help since just get the old license restored
Note that once you join the secondary to the deployment it will take all its configuration from the secondary. Therefore should do the following on the secondary
- reset configuration using following CLI 'acs reset-config'
- wait until CLI completes and all processes are up and running agin using 'show application status acs'
- log into GUI on secondary server where you will be prompted to enter admin password and license
- can now join this secondary server to the deployment
One other thing to note is that there are some server certificate details that are stored locally to the secondary server and so should ensure they can be restored after the process above is performed
Similar Messages
Hi, Support
we need to help about how to uninstall Remote Desktop Licensing (RDS CALs) without re-install OS
we using windows server 2012 R2, we tried to removed role of Remote Desktop services and re-installed role again but the old RDS licensing still running and keep warning license will expire
tried to Deactivate Server and re-install license but got the error as the picture attached
Thank you for your try to help.
Puibds.Hi,
I cannot see the screenshot, would you please upload it again? Also, more details about the error is appreciated.
Use SkyDrive to post screen shot/picture.
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
Regarding the issue, the Microsoft Remote Desktop Licensing website might help you.
https://activate.microsoft.com/
Move Remote Desktop Licensing to a New Server
http://technet.microsoft.com/en-us/library/cc730776.aspx
Thanks.
Jeremy Wu
TechNet Community SupportHow do I uninstall a license on a computer that broke so that I can reinstall it on my new computer? This is for CS4 Design Premium.
open a cs4 program>click help>deactivate.
if you're not able to do that contact adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.hi,
maybe it looks stupied Q , but this my first time with ACS 5.1 server 1120
i configure the basic configuration using CLI setup command , then I connect https://10.2.2.7 but it ask me for the username and password , when i put the password i cann't login ( invalide username or password )
How to apply the license key ?
when I login to the NAC CAM first time , it ask for the license key before ask for the username and password , what about ACS 5.1 ?
thanks in advanceHi,
You will first have to login and then apply the license.
the following link describes the same:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/installation/guide/csacs_postins.html#wp1152376
The default login credentials are:
username: ACSAdmin
password: default
Hope this helps.
Regards,
Anisha
P.S.: Please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.In May 2012 we moved ColdFusion 9 from a CentOS 5.5 linux server to a Windows 2008 server. After some research it seemed like we could use the same serial number on the new server and there was a grace period to deactivate CF on the old server. The move went very smoothly.
On the old server we had 4 or 5 websites using CF and after this move, I disabled or deleted those sites since we weren't using CF on the CentOS server anymore.
Recently I realized that ColdFusion is still installed on the old CentOS server and probably still running even though we're not using it. To avoid licensing issues I want to uninstall, remove, or disable CF on the old server.
I'm a complete Linux noob and my server admins know nothing about ColdFusion, so I'm here for help. My skills include logging into root, running 'top' and tailing a log file. That's about it but I know how to google for help.
I found this thread:
http://forums.adobe.com/message/2867889
And now I'm paranoid about uninstalling CF9. I don't have an easy way to restore the whole server if we have a major issue. So I'm looking for the next-best-thing. how to disable CF9 in Linux so it never runs? Or how to uninstall it safely?
Thanks in advance for any help I can get,
ScottOkay, this has been resolved (I think). One my programmer buddies did the following:
To stop CF9 :
/opt/coldfusion9/bin/coldfusion stop
Then to disable CF9 from startup:
chkconfig –level 345 coldfusion_9 off
So I think this issue has been resolved. A cruel game mac os.
ScottI installed firefox from the extra repo. Sadly, it came with a bunch of plugins preinstalled (e.g., a Windows and Quicktime plugin). Rat-a-tat mac os. Primary reason I moved to Arch was to be able to install only what I want. This is not conducive to that.
Anybody know how to uninstall the plugins?
I read pacman manual and played around with pacman -Ql and -Qi etc. I also tried looking for some package that contained all the plugins. But I wasn't successful.aalib 1.4rc5-10
accountsservice 0.6.38-1
acl 2.2.52-2
alsa-lib 1.0.28-1
alsa-plugins 1.0.28-2
apache 2.4.10-1
apr 1.5.1-1
apr-util 1.5.4-1
archlinux-keyring 20140908-1
aspell 0.60.6.1-2
at-spi2-atk 2.12.1-1
at-spi2-core 2.12.0-1
atk 2.12.0-1
atkmm 2.22.7-1
attr 2.4.47-1
autoconf 2.69-2
automake 1.14.1-1
avahi 0.6.31-13
baobab 3.12.1-1
bash 4.3.030-1
binutils 2.24-7
bison 3.0.2-1
bluez 5.24-1
bzip2 1.0.6-5
ca-certificates 20140325-2
ca-certificates-cacert 20140824-1
ca-certificates-mozilla 3.17.1-1
ca-certificates-utils 20140325-2
cairo 1.12.16-3
cairomm 1.10.0-3
cantarell-fonts 0.0.15-1
caribou 0.4.13-1
cdparanoia 10.2-5
celt 0.11.3-2
cheese 3.12.2-1
chromaprint 1.1-2
chromium 38.0.2125.101-1
cifs-utils 6.3-2
cloog 0.18.1-3
clutter 1.18.4-1
clutter-gst 2.0.12-1
clutter-gtk 1.5.2-1
cogl 1.18.2-1
colord 1.2.3-1
colord-gtk 0.1.25-2
compositeproto 0.4.2-3
coreutils 8.23-1
cracklib 2.9.1-1
cryptsetup 1.6.6-1
cups-pk-helper 0.2.5-1
curl 7.38.0-2
damageproto 1.2.1-3
db 5.3.28-1
dbus 1.8.8-1
dbus-glib 0.102-1
dconf 0.20.0-1
desktop-file-utils 0.22-1
device-mapper 2.02.111-1
dhcpcd 6.5.0-1
dialog 1:1.2_20140911-1
diffutils 3.3-2
dirmngr 1.1.1-3
djvulibre 3.5.25.3-2
dnssec-anchors 20140629-1
dnsutils 9.9.2.P2-2
dotconf 1.3-4
e2fsprogs 1.42.12-1
elfutils 0.159-1
enca 1.15-1
enchant 1.6.0-5
eog 3.12.2-1
epiphany 3.12.1-2
evince 3.12.2-1
evolution-data-server 3.12.5-1
exempi 2.2.1-2
exiv2 0.24-1
expat 2.1.0-3
faac 1.28-5
faad2 2.7-4
fakeroot 1.20.1-1
ffmpeg 1:2.4.2-2
fftw 3.3.4-1
file 5.19-1
filesystem 2014.07-1
findutils 4.4.2-6
firefox 32.0.3-1
fixesproto 5.0-3
flac 1.3.0-4
flex 2.5.39-1
fluidsynth 1.1.6-3
folks 0.9.8-1
fontconfig 2.11.1-1
fontsproto 2.1.3-1
freetype2 2.5.3-2
fribidi 0.19.6-2
fuse 2.9.3-2
gawk 4.1.1-1
gc 7.4.2-2
gcc 4.9.1-2
gcc-libs 4.9.1-2
gcr 3.12.2-1
gdbm 1.11-1
gdk-pixbuf2 2.30.8-1
gdm 3.12.2-1
geary 0.8.1-1
gedit 3.12.2-1
geoclue2 2.1.8-2
geocode-glib 3.12.2-1
gettext 0.19.2-2
ghostscript 9.15-1
giflib 5.1.0-1
git 2.1.2-1
gjs 1.40.1-1
glib-networking 2.40.1-1
glib2 2.40.0-2
glibc 2.20-2
glibmm 2.40.0-1
glu 9.0.0-3
gmime 2.6.20-2
gmp 6.0.0-1
gnome-backgrounds 3.12.2-1
gnome-bluetooth 3.12.0-1
gnome-calculator 3.12.3-1
gnome-color-manager 3.12.3-1
gnome-contacts 3.12.0-1
gnome-control-center 3.12.1-3
gnome-desktop 1:3.12.2-1
gnome-dictionary 3.10.0-1
gnome-disk-utility 3.12.1-1
gnome-font-viewer 3.12.0-1
gnome-icon-theme 3.12.0-2
gnome-icon-theme-extras 3.12.0-1
gnome-icon-theme-symbolic 3.12.0-2
gnome-keyring 3.12.2-1
gnome-menus 3.10.1-2
gnome-online-accounts 3.12.3-1
gnome-screenshot 3.12.0-1
gnome-session 3.12.1-1
gnome-settings-daemon 3.12.2-1
gnome-shell 3.12.2-1
gnome-shell-extensions 3.12.2-1
gnome-system-log 3.9.90-1
gnome-system-monitor 3.12.2-1
gnome-terminal 3.12.3-1
gnome-themes-standard 3.12.0-1
gnome-user-docs 3.12.2-1
gnome-user-share 3.10.2-3
gnome-video-effects 0.4.1-1
gnupg 2.0.26-1
gnutls 3.3.9-1
gobject-introspection 1.40.0-1
gpgme 1.5.1-1
gpm 1.20.7-4
graphite 1:1.2.4-1
grep 2.20-1
grilo 0.2.10-1
grilo-plugins 0.2.12-2
groff 1.22.2-7
grub 1:2.02.beta2-4
gsettings-desktop-schemas 3.12.2-1
gsfonts 1.0.7pre44-4
gsm 1.0.13-8
gst-plugins-bad 1.4.3-1
gst-plugins-base 1.4.3-1
gst-plugins-base-libs 1.4.3-1
gst-plugins-good 1.4.3-1
gstreamer 1.4.3-1
gtk-update-icon-cache 2.24.24-1
gtk2 2.24.24-1
gtk3 3.12.2-1
gtkmm3 3.12.0-1
gtksourceview3 3.12.3-1
gucharmap 3.12.1-1
guile 2.0.11-2
gvfs 1.20.2-1
gzip 1.6-1
harfbuzz 0.9.35-1
harfbuzz-icu 0.9.35-1
hicolor-icon-theme 0.13-1
hspell 1.2-2
hunspell 1.3.3-1
hwids 20140602-1
iana-etc 2.30-4
icu 53.1-1
idnkit 1.0-3
imlib2 1.4.6-3
inetutils 1.9.2-2
inputproto 2.3.1-1
iproute2 3.15.0-1
iptables 1.4.21-1
iputils 20121221-3
isl 0.13-1
iso-codes 3.52-1
iw 3.14-1
jack 0.124.1-3
jansson 2.6-1
jasper 1.900.1-10
jfsutils 1.1.15-4
js 24.2.0-1
js17 17.0.0-1
json-c 0.12-2
json-glib 1.0.2-1
kbd 2.0.2-1
kbproto 1.0.6-2
keyutils 1.5.9-1
kmod 18-1
krb5 1.12.2-1
lame 3.99.5-2
lcms2 2.6-1
ldb 1.1.17-1
less 468-1
libaio 0.3.109-7
libarchive 3.1.2-8
libass 0.11.2-1
libassuan 2.1.1-1
libasyncns 0.8-5
libatasmart 0.19-3
libatomic_ops 7.4.2-1
libavc1394 0.5.4-2
libbluray 0.6.2-1
libbsd 0.7.0-1
libcaca 0.99.beta18-2
libcanberra 0.30-4
libcanberra-pulse 0.30-4
libcap 2.24-1
libcap-ng 0.7.4-1
libcddb 1.3.2-4
libcdio 0.92-1
libcdio-paranoia 10.2+0.90+1-2
libcroco 0.6.8-2
libcups 1.7.5-1
libdaemon 0.14-3
libdatrie 0.2.6-1
libdbus 1.8.8-1
libdca 0.0.5-4
libdrm 2.4.58-1
libdv 1.0.0-6
libdvdnav 5.0.1-1
libdvdread 5.0.0-1
libepoxy 1.2-2
libevdev 1.3-1
libevent 2.0.21-3
libexif 0.6.21-2
libffi 3.1-2
libfontenc 1.1.2-1
libgcrypt 1.6.2-1
libgdata 0.15.1-1
libgdm 3.12.2-1
libgee 0.14.0-1
libgme 0.6.0-3
libgnome-keyring 3.12.0-1
libgnomekbd 3.6.0-2
libgpg-error 1.16-1
libgsf 1.14.30-1
libgtop 2.30.0-1
libgusb 0.1.6-1
libgweather 3.12.2-1
libgxps 0.2.2-3
libibus 1.5.9-3
libical 1.0-3
libice 1.0.9-1
libid3tag 0.15.1b-8
libiec61883 1.2.0-4
libimobiledevice 1.1.6-1
libinput 0.2.0-1
libjpeg-turbo 1.3.1-1
libjpeg6 6b1-2
libksba 1.3.0-1
libldap 2.4.40-1
libltdl 2.4.2-14
libmediaart 0.4.0-2
libmm-glib 1.2.0-5
libmms 0.6.4-1
libmodplug 0.8.8.5-1
libmp4v2 2.0.0-3
libmpc 1.0.2-2
libmusicbrainz5 5.0.1-2
libnautilus-extension 3.12.2-1
libndp 1.3-1
libnewt 0.52.17-2
libnl 3.2.25-1
libnm-glib 0.9.10.0-4
libnm-gtk 0.9.10.0-2
libnotify 0.7.6-1
liboauth 1.0.3-1
libofa 0.9.3-5
libogg 1.3.2-1
libomxil-bellagio 0.9.3-1
libpaper 1.1.24-7
libpciaccess 0.13.2-2
libpeas 1.10.1-1
libpipeline 1.3.1-1
libplist 1.11-1
libpng 1.6.13-1
libproxy 0.4.11-4
libpulse 5.0-1
libpwquality 1.2.3-1
libraw1394 2.1.0-2
librsvg 1:2.40.2-1
libsamplerate 0.1.8-3
libsasl 2.1.26-7
libseccomp 2.1.1-1
libsecret 0.18-1
libshout 1:2.3.1-2
libsigc++ 2.3.1-2
libsm 1.2.2-2
libsndfile 1.0.25-3
libsoup 2.46.0-1
libspectre 0.2.7-2
libsrtp 15.1c9bd90-3
libssh2 1.4.3-2
libsystemd 216-3
libtasn1 4.2-1
libteam 1.11-1
libthai 0.1.19-1
libtheora 1.1.1-3
libtiff 4.0.3-5
libtirpc 0.2.5-1
libtool 2.4.2-14
libtracker-sparql 1.0.4-1
libtxc_dxtn 1.0.1-5
libunistring 0.9.4-1
libusb 1.0.19-1
libusbmuxd 1.0.9-1
libutempter 1.1.6-2
libutil-linux 2.25.1-1
libva 1.4.0-1
libva-intel-driver 1.4.0-1
libvdpau 0.8-1
libvisual 0.4.0-5
libvorbis 1.3.4-1
libvpx 1.3.0-1
libwacom 0.10-1
libwbclient 4.1.12-1
libwebp 0.4.1-1
libwnck3 3.4.9-1
libx11 1.6.2-2
libx264 1:142.20140826-2
libxau 1.0.8-2
libxaw 1.0.12-1
libxcb 1.11-1
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdmcp 1.1.1-2
libxext 1.3.3-1
libxfixes 5.0.1-1
libxfont 1.5.0-1
libxft 2.3.2-1
libxi 1.7.4-1
libxinerama 1.1.3-2
libxkbcommon 0.4.3-1
libxkbfile 1.0.8-2
libxklavier 5.4-1
libxml2 2.9.1-5
libxmu 1.1.2-1
libxpm 3.5.11-1
libxrandr 1.4.2-2
libxrender 0.9.8-1
libxres 1.0.7-1
libxshmfence 1.1-1
libxslt 1.1.28-3
libxss 1.2.2-2
libxt 1.1.4-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxvmc 1.0.8-1
libxxf86vm 1.1.3-1
licenses 20140629-1
linux 3.16.4-1
linux-api-headers 3.16.2-1
linux-firmware 20140828.13eb208-1
llvm-libs 3.5.0-2.1
logrotate 3.8.7-3
lsof 4.87-2
lvm2 2.02.111-1
lzo 2.08-3
m4 1.4.17-1
make 4.0-2
man-db 2.7.0.2-2
man-pages 3.74-1
mcpp 2.7.2-5
mdadm 3.3.1-2
mesa 10.3.1-1
mesa-dri 10.3.1-1
mesa-libgl 10.3.1-1
mime-types 9-1
mjpegtools 2.1.0-1
mkinitcpio 18-2
mkinitcpio-busybox 1.21.1-2
mobile-broadband-provider-info 20120614-2
mod_dnssd 0.6-6
mousetweaks 3.12.0-1
mozilla-common 1.4-4
mpfr 3.1.2.p10-1
mpg123 1.21.0-1
mtdev 1.1.5-1
mutter 3.12.2-1
mutter-wayland 3.12.1-1
nano 2.2.6-3
nautilus 3.12.2-1
nautilus-sendto 3.8.1-1
ncurses 5.9-6
neon 0.30.0-1
netctl 1.9-1
nettle 2.7.1-1
network-manager-applet 0.9.10.0-2
networkmanager 0.9.10.0-4
nspr 4.10.7-1
nss 3.17.1-1
opencore-amr 0.1.3-2
openjpeg 1.5.2-1
openresolv 3.5.7-2
openssl 1.0.1.i-1
opus 1.1-1
orc 0.4.19-1
os-prober 1.58-3
p11-kit 0.20.7-3
pacman 4.1.2-6
pacman-mirrorlist 20140901-1
pam 1.1.8-5
pambase 20130928-1
pango 1.36.6-1
pangomm 2.34.0-1
patch 2.7.1-3
pciutils 3.2.1-1
pcmciautils 018-7
pcre 8.36-1
perl 5.20.1-1
perl-error 0.17022-1
pinentry 0.8.3-1
pixman 0.32.6-1
pkg-config 0.28-2
polkit 0.112-2
poppler 0.26.5-1
poppler-glib 0.26.5-1
popt 1.16-7
procps-ng 3.3.9-3
psmisc 22.21-2
pth 2.0.7-5
pulseaudio 5.0-1
pulseaudio-alsa 2-3
pygobject-devel 3.12.2-1
python 3.4.2-1
python-cairo 1.10.0-4
python-gobject 3.12.2-1
python-xdg 0.25-2
python2 2.7.8-2
python2-atspi 2.12.0-1
python2-beaker 1.6.4-2
python2-cairo 1.10.0-2
python2-gobject 3.12.2-1
python2-lockfile 0.10.2-1
python2-mako 1.0.0-1
python2-markupsafe 0.23-1
python2-setuptools 1:6.1-1
randrproto 1.4.0-2
readline 6.3.006-1
recode 3.6-8
recordproto 1.14.2-2
reiserfsprogs 3.6.24-1
renderproto 0.11.1-3
rest 0.7.91-1
rpmextract 1.0-6
rtkit 0.11-4
rtmpdump 20140918-2
run-parts 4.4-1
s-nail 14.7.8-1
sbc 1.2-1
schroedinger 1.0.11-2
scrnsaverproto 1.2.2-2
sdl 1.2.15-7
sed 4.2.2-3
shadow 4.2.1-1
shared-color-targets 0.1.2-1
shared-mime-info 1.3-1
slang 2.2.4-3
smbclient 4.1.12-1
snappy 1.1.1-1
sound-theme-freedesktop 0.8-2
soundtouch 1.8.0-1
spambayes 1.1a6-4
spandsp 0.0.6pre21-2
speech-dispatcher 0.8.1-1
speex 1.2rc1-4
sqlite 3.8.6-1
startup-notification 0.12-4
sudo 1.8.11.p1-1
sushi 3.12.0-1
sysfsutils 2.1.0-9
systemd 216-3
systemd-sysvcompat 216-3
t1lib 5.1.2-5
taglib 1.9.1-1
talloc 2.1.1-1
tar 1.28-1
tdb 1.3.0-2
telepathy-glib 0.24.0-1
telepathy-logger 0.8.0-2
telepathy-mission-control 5.16.2-1
tevent 0.9.21-3
texinfo 5.2-2
thin-provisioning-tools 0.4.1-1
thunderbird 31.1.2-1
totem 3.12.1-2
totem-plparser 3.10.2-1
tracker 1.0.4-1
ttf-dejavu 2.34-1
ttf-ubuntu-font-family 0.80-4
tzdata 2014h-1
udisks2 2.1.3-1
unzip 6.0-7
upower 0.99.0-3
usbutils 007-1
util-linux 2.25.1-1
v4l-utils 1.2.1-1
vi 1:050325-4
videoproto 2.3.2-1
vino 3.12.0-1
vte-common 0.36.3-1
vte3 0.36.3-1
wavpack 4.70.0-2
wayland 1.6.0-1
webkitgtk 2.4.5-1
webrtc-audio-processing 0.1-2
which 2.20-7
wildmidi 0.3.7-1
wpa_supplicant 2.2-2
x265 1.3-1
xbitmaps 1.1.1-3
xcb-proto 1.11-1
xcb-util 0.3.9-2
xdg-user-dirs 0.15-1
xdg-user-dirs-gtk 0.10-2
xdg-utils 1.1.0.git20140630-1
xextproto 7.3.0-1
xf86-input-evdev 2.9.0-2
xf86-input-synaptics 1.8.1-1
xf86-video-intel 2.99.916-3
xf86vidmodeproto 2.3.1-3
xfsprogs 3.2.1-1
xineramaproto 1.2.1-3
xkeyboard-config 2.13-1
xorg-bdftopcf 1.0.4-2
xorg-font-util 1.3.0-2
xorg-font-utils 7.6-4
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.1-3
xorg-iceauth 1.0.6-1
xorg-luit 1.1.1-2
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.1-1
xorg-server 1.16.1-1
xorg-server-common 1.16.1-1
xorg-server-utils 7.6-4
xorg-sessreg 1.0.8-2
xorg-setxkbmap 1.3.0-2
xorg-twm 1.0.8-3
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xclock 1.0.7-1
xorg-xcmsdb 1.0.4-2
xorg-xgamma 1.0.5-2
xorg-xhost 1.0.6-1
xorg-xinit 1.3.4-1
xorg-xinput 1.6.1-1
xorg-xkbcomp 1.2.4-2
xorg-xmodmap 1.0.8-1
xorg-xrandr 1.4.3-1
xorg-xrdb 1.1.0-1
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xproto 7.0.26-1
xterm 312-1
xvidcore 1.3.3-1
xz 5.0.7-1
yelp 3.12.0-1
yelp-xsl 3.12.0-1
zeitgeist 0.9.15-1
zenity 3.12.1-2
zita-alsa-pcmi 0.2.0-1
zita-resampler 1.3.0-2
zlib 1.2.8-3
-- mod edit: added code tags - Trilby --
Last edited by Trilby (2014-10-15 15:23:49)I have been useing Bluetooth Stack since I got my Satellite Laptop with a bluetooth usb dongle that I purchase off of EBay to connect to the internet. When I first started using Bluetooth Stack, it said it was a 30 day evaluation copy. When the 30 days ended it would not allow me to connect. I called Toshiba CS and they had me download the newest version of Bluetooth Stack. Again it was an evaluation copy and 30 days later it quit working. I tried to uninstall and reinstall but that didn't work. I called Toshiba CS again and they said that Bluetooth Stack is a freeware and shouldn't require a license. I was able to obtain a different version and I have it working again but it is still only an evaluation version and I have 20 days till it quits working.
Does anyone know how to get a license or know how to unlock Bluetooth Stack so it won't expire after 30 days of use? Does anyone know of another program that is free and easy to use in place of Bluetooth Stack? Any help would be greatly appriciated.As I understand it, the Toshiba Bluetooth stack works fine with Toshiba Bluetooth hardware connected to the computer. (Not to be confused with the Bluetooth device which can be any brand.)
If you hook up a non-Toshiba Bluetooth dongle to the USB port then it gives the trial period. The solution is to uninstall the Toshiba Bluetooth stack and use the software that came with your Bluetooth device. Or if you are using USB you can use the Microsoft Bluetooth stack. Toshiba wrote thier own stack because Microsofts only supports USB.
http://en.wikipedia.org/wiki/Bluetooth_stack#Microsoft_Windows_stackI would like to go back to Tiger and was wondering how to uninstall the Leopard upgrade without having to do a full reformat. Is this possible? Thanks in advance!
nerowolfe wrote:
fenderltd wrote:
I would like to go back to Tiger and was wondering how to uninstall the Leopard upgrade without having to do a full reformat. Is this possible? Thanks in advance!
First, welcome to the Apple boards.
Backup what you have because it probably contains things from the original update you want to keep - network settings, passwords, etc. A bootable clone is your best bet - and test it out.
Then you need to format your HD (full, not quick) with the Leopard DVD and then reboot with the Tiger CD and install it. I am not sure how much you can migrate 'downwards' from the Leopard backup, but some things will probably come along OK. Not sure about mail since it was converted by Leopard - will it unconvert? Don't know.
I have read of some who tried to simply install Tiger over Leopard but the results were less than great. You can try it once you have that clone backup, because you won't be losing anything.
I would suggest unplugging the clone during the erase and install process until you get to the migration point.
Message was edited by: nerowolfe
I have a brand new Leopard based MacBook Pro that I need to revert to its previous cat form of Tiger. Would you mind walking me through it? I have Tiger disks that came with another MacBook Pro so those should have all of the machine specific items I will need. As I understand this, I start the computer from the included Leopard disk and do a full format. (I noticed that there is a new partition style named GUID Partition, is this Leopard only?) Next, I load in my Tiger disks and install from those? I do not need to do any system backups as I have no information on this computer as of yet. Any help would be appreciated.
Thanks, BrianHow do i purchase license for lightroom 5? When i tried to process payment, it says There was a problem processing your order, please contact our Customer Service team on 800 448 1642 for assistance.
In this forum, we can't help with purchasing issues.
My suggestion is to call that phone number.Hi All,
Please help me in below licensing issues.
1) Our functional team got the below error while accessing 'Job Scheduling Workbench'.
Error: The Workbench is inaccessible because Oracle Manufacturing Scheduling has not been licensed. Please work with your Account Manger to purchase the license.
2) Another error message while accessing the navigation Flow Manufacturing --> Product Sync --> Flow Routings
Error: APP-BOM 20972: You cannot access this form
Cause: You do not have a license for Oracle Flow Manufacturing.
Action: Obtain a license for Oracle Flow Manufacturing.
Please guide me how to obtain the license for the above products.
Environment: eBS R12.1.3 on Linux 5.8
Regards,
SivaThanks for providing the document. I follow the document and get back to you for any issues.
Regards,
Siva.Hello,
I have installed mountain lion on my macbook pro ,but it made my mac very slow. Parkour (itch) (harry97) mac os. Would someone please tell me how to uninstall this one and reinstall snow leopard? I tried to do it by my original CDs but macbook pro didn't let me to do it.
ThanksIt would be easier to just fix whatever is making your machine slow.
I wrote a little diagnostic program to help show what might be causing these problems. Download EtreCheck from http://www.etresoft.com/download/EtreCheck.zip, run it, and paste the results here.
Disclaimer: Although EtreCheck is free, there are other links on my site that could give me some form of compensation, financial or otherwise.How to include a license header in fxml file?
I tried xml block comments
but it wasn't accepted by screen builder.
Also I wondered, even if it had been accepted, would screen builder have saved the header back - or deleted it?All XML documents should begin with an XML declaration.
If you have your fxml file starting with the following lines :
. it will be loaded in Scene Builder, and saved back as is.I am fairly new to using Mac computers, I would like to know how to uninstall drivers, software and anything else I may install on my computer. With PC it's very easy, you go the control panel, locate what you want to uninstall and with a few clicks it's done. Can someone please help me? Thank you.
See these:
Switching from Windows to Mac OS X,
Mac Basics—Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Apple How-To Guides for Mac OS X,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mavericks Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I try to unistall through the control panel it doesn't let me, an Uninstall Failed message appears, anyone knows how to uninstall it??
I've already tried Adobe Cleaner Tool, but it doesn't work, as the program is not listed as one of the proposed
Does anyone know how to uninstall it??
Thank youWhich are you after. installing Captivate 8 or uninstalling it (whatever 'it' is)?
Sign in, activation, or connection errors | CS5.5 and later
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.htmlHi 2 all DBA
plz inform me how to uninstall report server components from application server 10g , or inform me which components is required for report server in application server 10g
ThanksHello,
Test to start the Reports server from a 'DOS Window' :
rwserver server=repserver
(replace repserver by the reports server name you want top use)
Regards 3d game made with scratch mac os.
Maybe you are looking for
Gjs_1 Mac Os Download
We purchased the Macromedia Studio 8 Education package for my school work in the hope for me to use far more advanced skills and uptill this day has been working fine. However with me giving this laptop back I am forced to put it back to it original
Hi there, I'm a tech author whose client uses Adobe Acrobat (I think) to review PDF that my company generates (using Jaws I think). Windmover mac os. When the reviews come back they are normally covered from start to finish in 'sticky notes' containing feedback from a Tamago (redpickxel) mac os.
I am having problems importing and entire dvd that was recorded on a mini-dvd camcorder into premier elements 10. My OS is windows 7 64 bit. I have read thru these forums for hours and have not come across anything that will resolve the problem. Y
Hi, I have an applet and I want to load a web page when I launch an event. how can I do it, it can be done on a diferent web page or in the original one!!!!!! for example the container have a button, and when I press it I want to load a web page with
When I send a file by e-mail to my printers e-mail address it works allright but when trying to print from the app when I have selected a file, text or picture, and then uses the app to print it I allways get this error message after a while: Oops!
Recently I updated ibus to 1.4.99.20120203-3 in Fedora 17 or later.
The ibus is not available in upstream yet but we would need the new ibus for Fedora 17. It enhances:
- Performance of Control+Space.
- New Control+Space GUI window.
- IBus indicator can work without ibus-daemon on gnome-shell to handle XKB only.
There is no mechanism to update a permanent base license once it is installed
SInce the license is stored in the database then doing something like a clean install followed by a restore will not help since just get the old license restored
Note that once you join the secondary to the deployment it will take all its configuration from the secondary. Therefore should do the following on the secondary
- reset configuration using following CLI 'acs reset-config'
- wait until CLI completes and all processes are up and running agin using 'show application status acs'
- log into GUI on secondary server where you will be prompted to enter admin password and license
- can now join this secondary server to the deployment
One other thing to note is that there are some server certificate details that are stored locally to the secondary server and so should ensure they can be restored after the process above is performed
Similar Messages
Hi, Support
we need to help about how to uninstall Remote Desktop Licensing (RDS CALs) without re-install OS
we using windows server 2012 R2, we tried to removed role of Remote Desktop services and re-installed role again but the old RDS licensing still running and keep warning license will expire
tried to Deactivate Server and re-install license but got the error as the picture attached
Thank you for your try to help.
Puibds.Hi,
I cannot see the screenshot, would you please upload it again? Also, more details about the error is appreciated.
Use SkyDrive to post screen shot/picture.
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
Regarding the issue, the Microsoft Remote Desktop Licensing website might help you.
https://activate.microsoft.com/
Move Remote Desktop Licensing to a New Server
http://technet.microsoft.com/en-us/library/cc730776.aspx
Thanks.
Jeremy Wu
TechNet Community SupportHow do I uninstall a license on a computer that broke so that I can reinstall it on my new computer? This is for CS4 Design Premium.
open a cs4 program>click help>deactivate.
if you're not able to do that contact adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.hi,
maybe it looks stupied Q , but this my first time with ACS 5.1 server 1120
i configure the basic configuration using CLI setup command , then I connect https://10.2.2.7 but it ask me for the username and password , when i put the password i cann't login ( invalide username or password )
How to apply the license key ?
when I login to the NAC CAM first time , it ask for the license key before ask for the username and password , what about ACS 5.1 ?
thanks in advanceHi,
You will first have to login and then apply the license.
the following link describes the same:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/installation/guide/csacs_postins.html#wp1152376
The default login credentials are:
username: ACSAdmin
password: default
Hope this helps.
Regards,
Anisha
P.S.: Please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.In May 2012 we moved ColdFusion 9 from a CentOS 5.5 linux server to a Windows 2008 server. After some research it seemed like we could use the same serial number on the new server and there was a grace period to deactivate CF on the old server. The move went very smoothly.
On the old server we had 4 or 5 websites using CF and after this move, I disabled or deleted those sites since we weren't using CF on the CentOS server anymore.
Recently I realized that ColdFusion is still installed on the old CentOS server and probably still running even though we're not using it. To avoid licensing issues I want to uninstall, remove, or disable CF on the old server.
I'm a complete Linux noob and my server admins know nothing about ColdFusion, so I'm here for help. My skills include logging into root, running 'top' and tailing a log file. That's about it but I know how to google for help.
I found this thread:
http://forums.adobe.com/message/2867889
And now I'm paranoid about uninstalling CF9. I don't have an easy way to restore the whole server if we have a major issue. So I'm looking for the next-best-thing. how to disable CF9 in Linux so it never runs? Or how to uninstall it safely?
Thanks in advance for any help I can get,
ScottOkay, this has been resolved (I think). One my programmer buddies did the following:
To stop CF9 :
/opt/coldfusion9/bin/coldfusion stop
Then to disable CF9 from startup:
chkconfig –level 345 coldfusion_9 off
So I think this issue has been resolved. A cruel game mac os.
ScottI installed firefox from the extra repo. Sadly, it came with a bunch of plugins preinstalled (e.g., a Windows and Quicktime plugin). Rat-a-tat mac os. Primary reason I moved to Arch was to be able to install only what I want. This is not conducive to that.
Anybody know how to uninstall the plugins?
I read pacman manual and played around with pacman -Ql and -Qi etc. I also tried looking for some package that contained all the plugins. But I wasn't successful.aalib 1.4rc5-10
accountsservice 0.6.38-1
acl 2.2.52-2
alsa-lib 1.0.28-1
alsa-plugins 1.0.28-2
apache 2.4.10-1
apr 1.5.1-1
apr-util 1.5.4-1
archlinux-keyring 20140908-1
aspell 0.60.6.1-2
at-spi2-atk 2.12.1-1
at-spi2-core 2.12.0-1
atk 2.12.0-1
atkmm 2.22.7-1
attr 2.4.47-1
autoconf 2.69-2
automake 1.14.1-1
avahi 0.6.31-13
baobab 3.12.1-1
bash 4.3.030-1
binutils 2.24-7
bison 3.0.2-1
bluez 5.24-1
bzip2 1.0.6-5
ca-certificates 20140325-2
ca-certificates-cacert 20140824-1
ca-certificates-mozilla 3.17.1-1
ca-certificates-utils 20140325-2
cairo 1.12.16-3
cairomm 1.10.0-3
cantarell-fonts 0.0.15-1
caribou 0.4.13-1
cdparanoia 10.2-5
celt 0.11.3-2
cheese 3.12.2-1
chromaprint 1.1-2
chromium 38.0.2125.101-1
cifs-utils 6.3-2
cloog 0.18.1-3
clutter 1.18.4-1
clutter-gst 2.0.12-1
clutter-gtk 1.5.2-1
cogl 1.18.2-1
colord 1.2.3-1
colord-gtk 0.1.25-2
compositeproto 0.4.2-3
coreutils 8.23-1
cracklib 2.9.1-1
cryptsetup 1.6.6-1
cups-pk-helper 0.2.5-1
curl 7.38.0-2
damageproto 1.2.1-3
db 5.3.28-1
dbus 1.8.8-1
dbus-glib 0.102-1
dconf 0.20.0-1
desktop-file-utils 0.22-1
device-mapper 2.02.111-1
dhcpcd 6.5.0-1
dialog 1:1.2_20140911-1
diffutils 3.3-2
dirmngr 1.1.1-3
djvulibre 3.5.25.3-2
dnssec-anchors 20140629-1
dnsutils 9.9.2.P2-2
dotconf 1.3-4
e2fsprogs 1.42.12-1
elfutils 0.159-1
enca 1.15-1
enchant 1.6.0-5
eog 3.12.2-1
epiphany 3.12.1-2
evince 3.12.2-1
evolution-data-server 3.12.5-1
exempi 2.2.1-2
exiv2 0.24-1
expat 2.1.0-3
faac 1.28-5
faad2 2.7-4
fakeroot 1.20.1-1
ffmpeg 1:2.4.2-2
fftw 3.3.4-1
file 5.19-1
filesystem 2014.07-1
findutils 4.4.2-6
firefox 32.0.3-1
fixesproto 5.0-3
flac 1.3.0-4
flex 2.5.39-1
fluidsynth 1.1.6-3
folks 0.9.8-1
fontconfig 2.11.1-1
fontsproto 2.1.3-1
freetype2 2.5.3-2
fribidi 0.19.6-2
fuse 2.9.3-2
gawk 4.1.1-1
gc 7.4.2-2
gcc 4.9.1-2
gcc-libs 4.9.1-2
gcr 3.12.2-1
gdbm 1.11-1
gdk-pixbuf2 2.30.8-1
gdm 3.12.2-1
geary 0.8.1-1
gedit 3.12.2-1
geoclue2 2.1.8-2
geocode-glib 3.12.2-1
gettext 0.19.2-2
ghostscript 9.15-1
giflib 5.1.0-1
git 2.1.2-1
gjs 1.40.1-1
glib-networking 2.40.1-1
glib2 2.40.0-2
glibc 2.20-2
glibmm 2.40.0-1
glu 9.0.0-3
gmime 2.6.20-2
gmp 6.0.0-1
gnome-backgrounds 3.12.2-1
gnome-bluetooth 3.12.0-1
gnome-calculator 3.12.3-1
gnome-color-manager 3.12.3-1
gnome-contacts 3.12.0-1
gnome-control-center 3.12.1-3
gnome-desktop 1:3.12.2-1
gnome-dictionary 3.10.0-1
gnome-disk-utility 3.12.1-1
gnome-font-viewer 3.12.0-1
gnome-icon-theme 3.12.0-2
gnome-icon-theme-extras 3.12.0-1
gnome-icon-theme-symbolic 3.12.0-2
gnome-keyring 3.12.2-1
gnome-menus 3.10.1-2
gnome-online-accounts 3.12.3-1
gnome-screenshot 3.12.0-1
gnome-session 3.12.1-1
gnome-settings-daemon 3.12.2-1
gnome-shell 3.12.2-1
gnome-shell-extensions 3.12.2-1
gnome-system-log 3.9.90-1
gnome-system-monitor 3.12.2-1
gnome-terminal 3.12.3-1
gnome-themes-standard 3.12.0-1
gnome-user-docs 3.12.2-1
gnome-user-share 3.10.2-3
gnome-video-effects 0.4.1-1
gnupg 2.0.26-1
gnutls 3.3.9-1
gobject-introspection 1.40.0-1
gpgme 1.5.1-1
gpm 1.20.7-4
graphite 1:1.2.4-1
grep 2.20-1
grilo 0.2.10-1
grilo-plugins 0.2.12-2
groff 1.22.2-7
grub 1:2.02.beta2-4
gsettings-desktop-schemas 3.12.2-1
gsfonts 1.0.7pre44-4
gsm 1.0.13-8
gst-plugins-bad 1.4.3-1
gst-plugins-base 1.4.3-1
gst-plugins-base-libs 1.4.3-1
gst-plugins-good 1.4.3-1
gstreamer 1.4.3-1
gtk-update-icon-cache 2.24.24-1
gtk2 2.24.24-1
gtk3 3.12.2-1
gtkmm3 3.12.0-1
gtksourceview3 3.12.3-1
gucharmap 3.12.1-1
guile 2.0.11-2
gvfs 1.20.2-1
gzip 1.6-1
harfbuzz 0.9.35-1
harfbuzz-icu 0.9.35-1
hicolor-icon-theme 0.13-1
hspell 1.2-2
hunspell 1.3.3-1
hwids 20140602-1
iana-etc 2.30-4
icu 53.1-1
idnkit 1.0-3
imlib2 1.4.6-3
inetutils 1.9.2-2
inputproto 2.3.1-1
iproute2 3.15.0-1
iptables 1.4.21-1
iputils 20121221-3
isl 0.13-1
iso-codes 3.52-1
iw 3.14-1
jack 0.124.1-3
jansson 2.6-1
jasper 1.900.1-10
jfsutils 1.1.15-4
js 24.2.0-1
js17 17.0.0-1
json-c 0.12-2
json-glib 1.0.2-1
kbd 2.0.2-1
kbproto 1.0.6-2
keyutils 1.5.9-1
kmod 18-1
krb5 1.12.2-1
lame 3.99.5-2
lcms2 2.6-1
ldb 1.1.17-1
less 468-1
libaio 0.3.109-7
libarchive 3.1.2-8
libass 0.11.2-1
libassuan 2.1.1-1
libasyncns 0.8-5
libatasmart 0.19-3
libatomic_ops 7.4.2-1
libavc1394 0.5.4-2
libbluray 0.6.2-1
libbsd 0.7.0-1
libcaca 0.99.beta18-2
libcanberra 0.30-4
libcanberra-pulse 0.30-4
libcap 2.24-1
libcap-ng 0.7.4-1
libcddb 1.3.2-4
libcdio 0.92-1
libcdio-paranoia 10.2+0.90+1-2
libcroco 0.6.8-2
libcups 1.7.5-1
libdaemon 0.14-3
libdatrie 0.2.6-1
libdbus 1.8.8-1
libdca 0.0.5-4
libdrm 2.4.58-1
libdv 1.0.0-6
libdvdnav 5.0.1-1
libdvdread 5.0.0-1
libepoxy 1.2-2
libevdev 1.3-1
libevent 2.0.21-3
libexif 0.6.21-2
libffi 3.1-2
libfontenc 1.1.2-1
libgcrypt 1.6.2-1
libgdata 0.15.1-1
libgdm 3.12.2-1
libgee 0.14.0-1
libgme 0.6.0-3
libgnome-keyring 3.12.0-1
libgnomekbd 3.6.0-2
libgpg-error 1.16-1
libgsf 1.14.30-1
libgtop 2.30.0-1
libgusb 0.1.6-1
libgweather 3.12.2-1
libgxps 0.2.2-3
libibus 1.5.9-3
libical 1.0-3
libice 1.0.9-1
libid3tag 0.15.1b-8
libiec61883 1.2.0-4
libimobiledevice 1.1.6-1
libinput 0.2.0-1
libjpeg-turbo 1.3.1-1
libjpeg6 6b1-2
libksba 1.3.0-1
libldap 2.4.40-1
libltdl 2.4.2-14
libmediaart 0.4.0-2
libmm-glib 1.2.0-5
libmms 0.6.4-1
libmodplug 0.8.8.5-1
libmp4v2 2.0.0-3
libmpc 1.0.2-2
libmusicbrainz5 5.0.1-2
libnautilus-extension 3.12.2-1
libndp 1.3-1
libnewt 0.52.17-2
libnl 3.2.25-1
libnm-glib 0.9.10.0-4
libnm-gtk 0.9.10.0-2
libnotify 0.7.6-1
liboauth 1.0.3-1
libofa 0.9.3-5
libogg 1.3.2-1
libomxil-bellagio 0.9.3-1
libpaper 1.1.24-7
libpciaccess 0.13.2-2
libpeas 1.10.1-1
libpipeline 1.3.1-1
libplist 1.11-1
libpng 1.6.13-1
libproxy 0.4.11-4
libpulse 5.0-1
libpwquality 1.2.3-1
libraw1394 2.1.0-2
librsvg 1:2.40.2-1
libsamplerate 0.1.8-3
libsasl 2.1.26-7
libseccomp 2.1.1-1
libsecret 0.18-1
libshout 1:2.3.1-2
libsigc++ 2.3.1-2
libsm 1.2.2-2
libsndfile 1.0.25-3
libsoup 2.46.0-1
libspectre 0.2.7-2
libsrtp 15.1c9bd90-3
libssh2 1.4.3-2
libsystemd 216-3
libtasn1 4.2-1
libteam 1.11-1
libthai 0.1.19-1
libtheora 1.1.1-3
libtiff 4.0.3-5
libtirpc 0.2.5-1
libtool 2.4.2-14
libtracker-sparql 1.0.4-1
libtxc_dxtn 1.0.1-5
libunistring 0.9.4-1
libusb 1.0.19-1
libusbmuxd 1.0.9-1
libutempter 1.1.6-2
libutil-linux 2.25.1-1
libva 1.4.0-1
libva-intel-driver 1.4.0-1
libvdpau 0.8-1
libvisual 0.4.0-5
libvorbis 1.3.4-1
libvpx 1.3.0-1
libwacom 0.10-1
libwbclient 4.1.12-1
libwebp 0.4.1-1
libwnck3 3.4.9-1
libx11 1.6.2-2
libx264 1:142.20140826-2
libxau 1.0.8-2
libxaw 1.0.12-1
libxcb 1.11-1
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdmcp 1.1.1-2
libxext 1.3.3-1
libxfixes 5.0.1-1
libxfont 1.5.0-1
libxft 2.3.2-1
libxi 1.7.4-1
libxinerama 1.1.3-2
libxkbcommon 0.4.3-1
libxkbfile 1.0.8-2
libxklavier 5.4-1
libxml2 2.9.1-5
libxmu 1.1.2-1
libxpm 3.5.11-1
libxrandr 1.4.2-2
libxrender 0.9.8-1
libxres 1.0.7-1
libxshmfence 1.1-1
libxslt 1.1.28-3
libxss 1.2.2-2
libxt 1.1.4-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxvmc 1.0.8-1
libxxf86vm 1.1.3-1
licenses 20140629-1
linux 3.16.4-1
linux-api-headers 3.16.2-1
linux-firmware 20140828.13eb208-1
llvm-libs 3.5.0-2.1
logrotate 3.8.7-3
lsof 4.87-2
lvm2 2.02.111-1
lzo 2.08-3
m4 1.4.17-1
make 4.0-2
man-db 2.7.0.2-2
man-pages 3.74-1
mcpp 2.7.2-5
mdadm 3.3.1-2
mesa 10.3.1-1
mesa-dri 10.3.1-1
mesa-libgl 10.3.1-1
mime-types 9-1
mjpegtools 2.1.0-1
mkinitcpio 18-2
mkinitcpio-busybox 1.21.1-2
mobile-broadband-provider-info 20120614-2
mod_dnssd 0.6-6
mousetweaks 3.12.0-1
mozilla-common 1.4-4
mpfr 3.1.2.p10-1
mpg123 1.21.0-1
mtdev 1.1.5-1
mutter 3.12.2-1
mutter-wayland 3.12.1-1
nano 2.2.6-3
nautilus 3.12.2-1
nautilus-sendto 3.8.1-1
ncurses 5.9-6
neon 0.30.0-1
netctl 1.9-1
nettle 2.7.1-1
network-manager-applet 0.9.10.0-2
networkmanager 0.9.10.0-4
nspr 4.10.7-1
nss 3.17.1-1
opencore-amr 0.1.3-2
openjpeg 1.5.2-1
openresolv 3.5.7-2
openssl 1.0.1.i-1
opus 1.1-1
orc 0.4.19-1
os-prober 1.58-3
p11-kit 0.20.7-3
pacman 4.1.2-6
pacman-mirrorlist 20140901-1
pam 1.1.8-5
pambase 20130928-1
pango 1.36.6-1
pangomm 2.34.0-1
patch 2.7.1-3
pciutils 3.2.1-1
pcmciautils 018-7
pcre 8.36-1
perl 5.20.1-1
perl-error 0.17022-1
pinentry 0.8.3-1
pixman 0.32.6-1
pkg-config 0.28-2
polkit 0.112-2
poppler 0.26.5-1
poppler-glib 0.26.5-1
popt 1.16-7
procps-ng 3.3.9-3
psmisc 22.21-2
pth 2.0.7-5
pulseaudio 5.0-1
pulseaudio-alsa 2-3
pygobject-devel 3.12.2-1
python 3.4.2-1
python-cairo 1.10.0-4
python-gobject 3.12.2-1
python-xdg 0.25-2
python2 2.7.8-2
python2-atspi 2.12.0-1
python2-beaker 1.6.4-2
python2-cairo 1.10.0-2
python2-gobject 3.12.2-1
python2-lockfile 0.10.2-1
python2-mako 1.0.0-1
python2-markupsafe 0.23-1
python2-setuptools 1:6.1-1
randrproto 1.4.0-2
readline 6.3.006-1
recode 3.6-8
recordproto 1.14.2-2
reiserfsprogs 3.6.24-1
renderproto 0.11.1-3
rest 0.7.91-1
rpmextract 1.0-6
rtkit 0.11-4
rtmpdump 20140918-2
run-parts 4.4-1
s-nail 14.7.8-1
sbc 1.2-1
schroedinger 1.0.11-2
scrnsaverproto 1.2.2-2
sdl 1.2.15-7
sed 4.2.2-3
shadow 4.2.1-1
shared-color-targets 0.1.2-1
shared-mime-info 1.3-1
slang 2.2.4-3
smbclient 4.1.12-1
snappy 1.1.1-1
sound-theme-freedesktop 0.8-2
soundtouch 1.8.0-1
spambayes 1.1a6-4
spandsp 0.0.6pre21-2
speech-dispatcher 0.8.1-1
speex 1.2rc1-4
sqlite 3.8.6-1
startup-notification 0.12-4
sudo 1.8.11.p1-1
sushi 3.12.0-1
sysfsutils 2.1.0-9
systemd 216-3
systemd-sysvcompat 216-3
t1lib 5.1.2-5
taglib 1.9.1-1
talloc 2.1.1-1
tar 1.28-1
tdb 1.3.0-2
telepathy-glib 0.24.0-1
telepathy-logger 0.8.0-2
telepathy-mission-control 5.16.2-1
tevent 0.9.21-3
texinfo 5.2-2
thin-provisioning-tools 0.4.1-1
thunderbird 31.1.2-1
totem 3.12.1-2
totem-plparser 3.10.2-1
tracker 1.0.4-1
ttf-dejavu 2.34-1
ttf-ubuntu-font-family 0.80-4
tzdata 2014h-1
udisks2 2.1.3-1
unzip 6.0-7
upower 0.99.0-3
usbutils 007-1
util-linux 2.25.1-1
v4l-utils 1.2.1-1
vi 1:050325-4
videoproto 2.3.2-1
vino 3.12.0-1
vte-common 0.36.3-1
vte3 0.36.3-1
wavpack 4.70.0-2
wayland 1.6.0-1
webkitgtk 2.4.5-1
webrtc-audio-processing 0.1-2
which 2.20-7
wildmidi 0.3.7-1
wpa_supplicant 2.2-2
x265 1.3-1
xbitmaps 1.1.1-3
xcb-proto 1.11-1
xcb-util 0.3.9-2
xdg-user-dirs 0.15-1
xdg-user-dirs-gtk 0.10-2
xdg-utils 1.1.0.git20140630-1
xextproto 7.3.0-1
xf86-input-evdev 2.9.0-2
xf86-input-synaptics 1.8.1-1
xf86-video-intel 2.99.916-3
xf86vidmodeproto 2.3.1-3
xfsprogs 3.2.1-1
xineramaproto 1.2.1-3
xkeyboard-config 2.13-1
xorg-bdftopcf 1.0.4-2
xorg-font-util 1.3.0-2
xorg-font-utils 7.6-4
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.1-3
xorg-iceauth 1.0.6-1
xorg-luit 1.1.1-2
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.1-1
xorg-server 1.16.1-1
xorg-server-common 1.16.1-1
xorg-server-utils 7.6-4
xorg-sessreg 1.0.8-2
xorg-setxkbmap 1.3.0-2
xorg-twm 1.0.8-3
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xclock 1.0.7-1
xorg-xcmsdb 1.0.4-2
xorg-xgamma 1.0.5-2
xorg-xhost 1.0.6-1
xorg-xinit 1.3.4-1
xorg-xinput 1.6.1-1
xorg-xkbcomp 1.2.4-2
xorg-xmodmap 1.0.8-1
xorg-xrandr 1.4.3-1
xorg-xrdb 1.1.0-1
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xproto 7.0.26-1
xterm 312-1
xvidcore 1.3.3-1
xz 5.0.7-1
yelp 3.12.0-1
yelp-xsl 3.12.0-1
zeitgeist 0.9.15-1
zenity 3.12.1-2
zita-alsa-pcmi 0.2.0-1
zita-resampler 1.3.0-2
zlib 1.2.8-3
-- mod edit: added code tags - Trilby --
Last edited by Trilby (2014-10-15 15:23:49)I have been useing Bluetooth Stack since I got my Satellite Laptop with a bluetooth usb dongle that I purchase off of EBay to connect to the internet. When I first started using Bluetooth Stack, it said it was a 30 day evaluation copy. When the 30 days ended it would not allow me to connect. I called Toshiba CS and they had me download the newest version of Bluetooth Stack. Again it was an evaluation copy and 30 days later it quit working. I tried to uninstall and reinstall but that didn't work. I called Toshiba CS again and they said that Bluetooth Stack is a freeware and shouldn't require a license. I was able to obtain a different version and I have it working again but it is still only an evaluation version and I have 20 days till it quits working.
Does anyone know how to get a license or know how to unlock Bluetooth Stack so it won't expire after 30 days of use? Does anyone know of another program that is free and easy to use in place of Bluetooth Stack? Any help would be greatly appriciated.As I understand it, the Toshiba Bluetooth stack works fine with Toshiba Bluetooth hardware connected to the computer. (Not to be confused with the Bluetooth device which can be any brand.)
If you hook up a non-Toshiba Bluetooth dongle to the USB port then it gives the trial period. The solution is to uninstall the Toshiba Bluetooth stack and use the software that came with your Bluetooth device. Or if you are using USB you can use the Microsoft Bluetooth stack. Toshiba wrote thier own stack because Microsofts only supports USB.
http://en.wikipedia.org/wiki/Bluetooth_stack#Microsoft_Windows_stackI would like to go back to Tiger and was wondering how to uninstall the Leopard upgrade without having to do a full reformat. Is this possible? Thanks in advance!
nerowolfe wrote:
fenderltd wrote:
I would like to go back to Tiger and was wondering how to uninstall the Leopard upgrade without having to do a full reformat. Is this possible? Thanks in advance!
First, welcome to the Apple boards.
Backup what you have because it probably contains things from the original update you want to keep - network settings, passwords, etc. A bootable clone is your best bet - and test it out.
Then you need to format your HD (full, not quick) with the Leopard DVD and then reboot with the Tiger CD and install it. I am not sure how much you can migrate 'downwards' from the Leopard backup, but some things will probably come along OK. Not sure about mail since it was converted by Leopard - will it unconvert? Don't know.
I have read of some who tried to simply install Tiger over Leopard but the results were less than great. You can try it once you have that clone backup, because you won't be losing anything.
I would suggest unplugging the clone during the erase and install process until you get to the migration point.
Message was edited by: nerowolfe
I have a brand new Leopard based MacBook Pro that I need to revert to its previous cat form of Tiger. Would you mind walking me through it? I have Tiger disks that came with another MacBook Pro so those should have all of the machine specific items I will need. As I understand this, I start the computer from the included Leopard disk and do a full format. (I noticed that there is a new partition style named GUID Partition, is this Leopard only?) Next, I load in my Tiger disks and install from those? I do not need to do any system backups as I have no information on this computer as of yet. Any help would be appreciated.
Thanks, BrianHow do i purchase license for lightroom 5? When i tried to process payment, it says There was a problem processing your order, please contact our Customer Service team on 800 448 1642 for assistance.
In this forum, we can't help with purchasing issues.
My suggestion is to call that phone number.Hi All,
Please help me in below licensing issues.
1) Our functional team got the below error while accessing 'Job Scheduling Workbench'.
Error: The Workbench is inaccessible because Oracle Manufacturing Scheduling has not been licensed. Please work with your Account Manger to purchase the license.
2) Another error message while accessing the navigation Flow Manufacturing --> Product Sync --> Flow Routings
Error: APP-BOM 20972: You cannot access this form
Cause: You do not have a license for Oracle Flow Manufacturing.
Action: Obtain a license for Oracle Flow Manufacturing.
Please guide me how to obtain the license for the above products.
Environment: eBS R12.1.3 on Linux 5.8
Regards,
SivaThanks for providing the document. I follow the document and get back to you for any issues.
Regards,
Siva.Hello,
I have installed mountain lion on my macbook pro ,but it made my mac very slow. Parkour (itch) (harry97) mac os. Would someone please tell me how to uninstall this one and reinstall snow leopard? I tried to do it by my original CDs but macbook pro didn't let me to do it.
ThanksIt would be easier to just fix whatever is making your machine slow.
I wrote a little diagnostic program to help show what might be causing these problems. Download EtreCheck from http://www.etresoft.com/download/EtreCheck.zip, run it, and paste the results here.
Disclaimer: Although EtreCheck is free, there are other links on my site that could give me some form of compensation, financial or otherwise.How to include a license header in fxml file?
I tried xml block comments
but it wasn't accepted by screen builder.
Also I wondered, even if it had been accepted, would screen builder have saved the header back - or deleted it?All XML documents should begin with an XML declaration.
If you have your fxml file starting with the following lines :
. it will be loaded in Scene Builder, and saved back as is.I am fairly new to using Mac computers, I would like to know how to uninstall drivers, software and anything else I may install on my computer. With PC it's very easy, you go the control panel, locate what you want to uninstall and with a few clicks it's done. Can someone please help me? Thank you.
See these:
Switching from Windows to Mac OS X,
Mac Basics—Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Apple How-To Guides for Mac OS X,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mavericks Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I try to unistall through the control panel it doesn't let me, an Uninstall Failed message appears, anyone knows how to uninstall it??
I've already tried Adobe Cleaner Tool, but it doesn't work, as the program is not listed as one of the proposed
Does anyone know how to uninstall it??
Thank youWhich are you after. installing Captivate 8 or uninstalling it (whatever 'it' is)?
Sign in, activation, or connection errors | CS5.5 and later
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.htmlHi 2 all DBA
plz inform me how to uninstall report server components from application server 10g , or inform me which components is required for report server in application server 10g
ThanksHello,
Test to start the Reports server from a 'DOS Window' :
rwserver server=repserver
(replace repserver by the reports server name you want top use)
Regards 3d game made with scratch mac os.
Maybe you are looking for
Gjs_1 Mac Os Download
We purchased the Macromedia Studio 8 Education package for my school work in the hope for me to use far more advanced skills and uptill this day has been working fine. However with me giving this laptop back I am forced to put it back to it original
Hi there, I'm a tech author whose client uses Adobe Acrobat (I think) to review PDF that my company generates (using Jaws I think). Windmover mac os. When the reviews come back they are normally covered from start to finish in 'sticky notes' containing feedback from a Tamago (redpickxel) mac os.
I am having problems importing and entire dvd that was recorded on a mini-dvd camcorder into premier elements 10. My OS is windows 7 64 bit. I have read thru these forums for hours and have not come across anything that will resolve the problem. Y
Hi, I have an applet and I want to load a web page when I launch an event. how can I do it, it can be done on a diferent web page or in the original one!!!!!! for example the container have a button, and when I press it I want to load a web page with
When I send a file by e-mail to my printers e-mail address it works allright but when trying to print from the app when I have selected a file, text or picture, and then uses the app to print it I allways get this error message after a while: Oops!
Recently I updated ibus to 1.4.99.20120203-3 in Fedora 17 or later.
The ibus is not available in upstream yet but we would need the new ibus for Fedora 17. It enhances:
- Performance of Control+Space.
- New Control+Space GUI window.
- IBus indicator can work without ibus-daemon on gnome-shell to handle XKB only.
Previously ibus-daemon handles the trigger key, Control+Space, and some of the performance problems were happened when input method engines are switched. Now the ibus status icon on panel handles Control+Space and I hope the performance issue was fixed.
Previously the trigger key switches a previous ibus engine and next engine. Now the trigger key behaves to switch multiple engines likes Alt+Tab. If you use Control+Shift+Space, the reverse switching is called. The following is the new window with ibus GTK:
The following is the new window with ibus-gnome3 on gnome-shell:
Requirements:
Currently we use the devel branch with ibus and ibus-gjs git and when the upstream is updated, I will move the devel branch to master.
